Skip to content
Made in CanadaManufactured, delivered & installed by VIVA Cabinetry5-year warranty
Toronto & the GTA · (416) 832-4904

What Are Pre-Made Kitchen Cabinets?

By the VIVA Cabinetry team

Modern kitchen built with pre-made kitchen cabinets in standard sizes
In this article
  1. How pre-made kitchen cabinets are sized
  2. Does pre-made mean cheap quality?
  3. Why pre-made cabinets cost less than custom
  4. Pre-made vs custom cabinets: which one fits your project?

Many homeowners hear “pre-made” and think “cheap”. This article explains how pre-made cabinets are sized, why they cost less than custom cabinets, and how to tell a well-built product from a poor one.

How pre-made kitchen cabinets are sized

Pre-made cabinets follow a simple rule: widths go up in increments of 3 inches. A manufacturer does not build a 31-inch cabinet. It builds a 30 and a 33, and the designer picks the combination that fits your wall.

Lower cabinet sizes

Lower (base) cabinets usually start at 9 inches wide and go up to 42 inches, in 3-inch steps: 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39 and 42. That is twelve widths to work with, which is enough to lay out almost any kitchen wall.

Upper cabinet sizes

Upper (wall) cabinets follow the same width logic as the lowers. The difference is the height, which comes in four options: 24, 30, 36 and 42 inches. The height you need depends on your ceiling and on how much space you want between the countertop and the uppers.

Diagram of standard cabinet widths in 3-inch increments and upper cabinet heights

What happens when the wall does not match

Walls are rarely an exact multiple of 3 inches. When a run of cabinets leaves a small gap, it is closed with a filler, a strip in the same finish as the doors. People often assume fillers are a compromise that only pre-made kitchens need. They are not. Custom kitchens use fillers too, because walls are never perfectly straight and doors need clearance to open beside a wall. In our experience, a filler is not what makes a kitchen look bad. A poor layout or a poor installation does that.

Does pre-made mean cheap quality?

No. Pre-made cabinets can be manufactured to high standards of cabinet construction. The word describes how the sizes are defined, not how well the cabinet is built.

What is true is that quality depends on the manufacturer. Some pre-made cabinets are built to last and some are not, and the same can be said of custom shops. This is where you need to do your due diligence.

What to check before you buy

  • The cabinet box. Ask what the box is made of and where the material is produced. Ask whether it carries environmental certifications.
  • The hardware. Open and close the doors and drawers in a showroom or sample. Hinges and drawer slides are what you will feel every day.
  • How the cabinets arrive. Some products ship flat-packed for assembly on site. Others arrive assembled from the factory. Know which one you are buying.
  • Who installs them. A good cabinet installed badly looks like a bad cabinet. Ask whether installation is included in the price and who does it.
  • The warranty. Ask how long it is and what it covers, in writing.
  • Finished projects. Ask to see real kitchens the company has completed, not only catalogue photos.

For the questions to ask about the company itself, from the quote to the lead time, see how to choose a cabinet company in Toronto.

Close view of cabinet box construction, hinge and drawer slide

Why pre-made cabinets cost less than custom

The lower price comes from time and labour, not from lower standards.

A production process built for one job

A pre-made cabinet factory does one thing: it produces. Because the sizes are already defined, nobody has to engineer each cabinet before it is built. The same parts are cut, drilled and assembled the same way every time, in a precise and controlled environment. That repetition is what makes the process efficient, and efficiency is what lowers the cost.

Why custom sizes cost more

A custom cabinetry shop works the opposite way. Every cabinet has its own dimensions, so every cabinet has to be drawn, checked and handled individually to make sure it is done right. There is no standard process to lean on. More hours and more skilled labour go into each piece, and that shows up in the price.

Materials bought and stocked in advance

Pre-made cabinets come with a pre-selected range of materials. This matters more than most people expect. The manufacturer keeps the raw material in stock and buys it in volume, which means better terms with suppliers. It also means the material is already in-house when your order comes in, so production does not wait on a special order. This plays a big role in the final cost and in how quickly the cabinets can be made.

Pre-made vs custom cabinets: which one fits your project?

Here is how the two compare:

Pre-made Custom
Sizes Standard widths in 3-inch increments Any dimension
Materials and finishes A selection defined by the manufacturer Almost anything you can source
Production A controlled, repeatable process Each cabinet engineered and built individually
Cost Lower, because less time and labour are involved Higher, for the same reason in reverse
Timing Materials are already in stock Materials are often ordered per project

When pre-made is the right choice

More often than people think. In our experience, most projects can be done with pre-made cabinets and reach the same final look as custom cabinetry. Once the kitchen is installed, with the right layout, panels and fillers, most people cannot tell which route was taken.

When custom is the way to go

Custom cabinetry is the right answer when the project asks for something a standard range cannot offer: special hardware, a unique material, or a design-driven space where the cabinetry itself is the feature. In those cases custom is worth it. Just be prepared for the extra cost that comes with it.

Questions people ask

Are pre-made kitchen cabinets good quality?

They can be. Pre-made refers to standard sizing, not to the level of construction. Quality depends on the manufacturer, so check the box material, the hardware, the warranty and finished projects before you decide.

What sizes do pre-made kitchen cabinets come in?

Widths increase in 3-inch increments. Lower cabinets usually run from 9 to 42 inches wide. Upper cabinets use the same widths and come in heights of 24, 30, 36 and 42 inches.

Can pre-made cabinets fit a kitchen with unusual dimensions?

In most cases, yes. The designer combines standard widths to get as close as possible to the wall length, and fillers close what is left. Very unusual spaces may be better served by custom cabinetry.

Will a pre-made kitchen look different from a custom one?

Usually not. With a good design and a careful installation, a pre-made kitchen can achieve the same final look. The difference shows only when the project calls for materials, hardware or shapes outside the standard range.